Adolfo B. Matamoros
Assistant Professor
Department of Civil & Environmental Engineering
University of Kansas

2150 Learned Hall
1530 West 15th Street
Lawrence, Kansas 66045-2225
USA
Voice: (785) 864-3761
Fax: (785) 864-5631
e-mail: amatamor@ku.edu


Degrees:
Ph.D.
University of Illinois at
Urbana-Champaign
MS University
of Illinois at Urbana-Champaign
Lic University of Costa Rica
Research Interests:
·
design and behavior of reinforced concrete members
·
steel connections
·
adaptive media
·
earthquake engineering
·
information technology
Courses Taught:
CE 250 - Engineering Systems
Analysis
CE 562 - Structural Design I
(Design of Steel Structures)
CE 563 - Structural Design II
(Design of Reinforced Concrete Structures)
CE 704 – Structural Dynamics
CE 762 – Behavior of
Reinforced Concrete Members
CE 763 – Advanced Concrete
Design I (Prestressed Concrete)
CE 790 - Structural and Seismic
Detailing
CE 790 – Reinforced Concrete
Bridge Design
Current and Resent Research Projects:
·
Developing a Taxonomy for Document Management, Kansas Department of
Transportation.
·
Assessment of
Non-NEES Equipment Site User Requirements, Washington University.
- K-16 Over Tuttle Creek
Fatigue Repair Project,
Kansas Department of Transportation.
- Collaborative
Research: Using NEES as a Testbed for Studying Soil Foundation-Structure
Interaction, University of Texas,
Austin/National Science Foundation.
- Reduced Brace Section
(RXS): Proof of Concept, Butler
Heavy Structures.
- Web-Enhanced Teaching
Module. American Institute of Steel Construction,
Papers and Committee Reports
- Brachmann, I., Browning,
J., Matamoros, A.,
“Drift –Dependent Confinement Requirements for Reinforced
Concrete Columns Under Cyclic Loading,” ACI
Structural Journal, Vol. 101,
No.5, September-October 2004, pp. 669-677.
- Reetz, R., Von Ramin,
M., and Matamoros, A., “Performance
of Mechanical Splices Within The Plastic Hinge
Region of Beams Subjected to Cyclic Loading,” 13th World Conference on Earthquake Engineering, Vancouver,
B.C., August 1-6, 2004.
14 pp.
- Russell, R., Matamoros,
A., Browning, J., “Strain Limits for Plastic Hinge Regions of
Reinforced Concrete Columns,” 13th
World Conference on Earthquake Engineering, Vancouver,
B.C., August 1-6, 2004.
13 pp.
- Brachmann, I.,
Browning, J., and Matamoros,
A., “Relationships Between Drift and Confinement in Reinforced
Concrete Columns Under Cyclic Loading,” 13th World Conference on
Earthquake Engineering, Vancouver,
B.C., August 1-6, 2004.
15 pp.
- Wood, S., Anagnos, T., Arduino, P., Eberhard, M., Fenves, G., Finholt, T., Futrelle, J.,
Jeremic, B., Kramer, S., Kutter, B., Matamoros, A., McMullin,
K., Ramirez, J., Rathje, E., Saiidi, M.,
Sanders, D., Stokoe, K., Wilson, D., “Using
NEES to Investigate Soil-Foundation-Structure Interaction,” 13th World Conference on Earthquake
Engineering, Vancouver, B.C., August 1-6, 2004. 6 pp.
- Gur, T., Ramirez, J.,
Sozen, M., Pay, C., Johnson, A., Bobet, A., Matamoros,
A., Irfanoglu, A., and Aikin, L., “Performance
of School Buildings in Bingol during the 1 May 2003 Earthquake,” 13th World Conference on Earthquake
Engineering, Vancouver,
B.C., August 1-6, 2004.
15 pp.
- Lambrecht, J.,
Matamoros, A., “Energy Dissipation using High-Performance Composite
Elements in Concentrically Braced Steel Frames,” Proceedings of International Symposium on Network and Center Based Research For
Smart Structures Technologies and Earthquake Engineering, Osaka,
Japan, July 6-9, 2004, pp. 109-114.
- Matamoros,
A., Garcia, L. E., Browning, J., and Lepage, A., “The Flat-Rate
Design Method for Low- and Medium-Rise Reinforced Concrete Structures, “ ACI Structural Journal, Vol. 101, No.
4, July-August 2004, pp. 435-446.
- ACI Committee 408, “ACI 408R-03, Bond
and Development of Straight Bars in Tension, Report by ACI Committee 408,”
American Concrete Institute, Farmington Hills, Michigan, November, 2003, 49 pp.
- Roddis,
W. M. K., Matamoros, A., “Overcoming the Language Barrier: AISC’s CIS/2 Initiative” Towards a Vision for Information
Technology in Civil Engineering, 4th
Joint Symposium on Information Technology in Civil Engineering,
Nashville, Tennessee, 12-15 November, 2003, pp. 298-305.
- Matamoros,
A., Browning, J., and Luft, M., “Evaluation of Simple Methods for
Estimating Drift of Reinforced Concrete Buildings Subjected to
Earthquakes,” Earthquake
Spectra, The Professional Journal of the Earthquake Engineering
Research Institute, Vol. 19, I 4, November 2003, pp. 839-861.
- Matamoros,
A., Kuok-Hong, “Design of Simply Supported Deep Beams using Strut-and-Tie
Models,” ACI Structural
Journal, V. 100, No. 6, November-December. 2003, pp. 704-712.
- Matamoros,
A., and Roddis, W. M. K., “WWWeb Enhanced
Teaching of Steel Design,” Publication in Digital Format, American
Institute of Steel Construction, Chicago,
IL., September 2003.
- Matamoros
A. and Sozen, M., “Drift Limits of High-Strength Concrete Columns
Subjected to Load Reversals,” Journal
of Structural Engineering, ASCE., V. 129, No.
3, March 2003, pp. 297-313.
- Darwin, D., McCabe, S.,
Browning, J., Matamoros, A., and Zuo, J., “Evaluation
of Development Length Design Expressions,” Bond in Concrete – from research to standards –
International Symposium sponsored by CEB – FIP and International
Federation for Structural Concrete, Budapest, Hungary, 20-22 November
2002, pp. 747-754.
- Matamoros,
A. “Smart Composites with Shape Memory Alloy Fibers,” Workshop
on Smart Structural Systems, Workshop
on Smart Structural Systems organized for U.S.-Japan Cooperative Research Programs
on Smart Structural Systems (Auto-adaptive Media) and Urban Earthquake Disaster Mitigation. Building
Research Institute, Tsukuba, Japan,
October 18-19, 2002,
pp. 175-180.
- Aguilar,
G., Matamoros, A., Parra-Montesinos, G., Ramirez, J., and Wight, J.,
“Experimental Evaluation of Design Procedures for Shear Strength of
Deep Reinforced Concrete Beams,” ACI
Structural Journal, V. 99, No. 4, July-August 2002, pp. 539-548.
- Matamoros,
A., and Ramirez, J., “Example 6: Prestressed Beam,” Example for the Design
of Structural Concrete with Strut-and-Tie
Models, SP-208, American Concrete Institute, Farmington
Hills, MI, 2002, pp.
163-184.
- Browning, J., Matamoros, A., Marsh, J., “Evaluation
of Simple Methods for Performance Assessment of Buildings Subjected to
Earthquakes,” Proceedings of the International
Conference on Advances in Structural Dynamics, Hong Kong 13 –15th
December 2000, Elsevier, pp. 809-819.
Research Reports
·
Von Ramin, Malte,
and Matamoros, A., “Shear Strength of Reinforced Concrete Members
Subjected to Monotonic and Cyclic Loads, SM
Report No. 72, University of Kansas Center for Research, Inc., Lawrence,
Kansas, June 2004, 517 pp.
- Ozcebe,
G., Ramirez, J., Wasti, T. and Yakut, A. (Technical Editors) “1 May 2003 Bingol Earthquake Engineering Report,” Joint
Report to TUBITAK and NSF, Middle East Technical University and Purdue
University, http://bridge.ecn.purdue.edu/~anatolia/BINGOL/Joint%20Report.pdf
, 2003, 139 pp.
- Zeckmann,
R., and Matamoros, A., “Use
of Strut-and-Tie Models to Calculate the Strength of Deep Beams with
Openings,“ SM Report No. 69,
University of Kansas Center for Research, Inc., Lawrence, Kansas, July
2002, 69 pp.
·
Brachmann, I.,
Browning, J., and Matamoros, A.
“Drift Capacity Approaches of Rectangular Slender Reinforced
Concrete Columns Under Cyclic Loading,” SM Report No. 68,
University of Kansas Center for Research, Inc., Lawrence, Kansas, May 2002, 221
pp.
·
Von Ramin, M., Matamoros, A., and Browning, J.
“Effect of Shear Strength and Geometry on Performance of
Short-Period Systems,” SL Report
02-1, University of Kansas Center for Research, Inc., Lawrence, Kansas, May
2002, 125 pp.
·
Luft, M., and
Matamoros, A., “Performance of Reinforced Concrete Structures Subjected
to Earthquake Motions,“ SM Report
No. 62, University of Kansas Center for Research, Inc., Lawrence, Kansas, May
2001, 69 pp.
- Eberhard, M., Matamoros,
A. and Whittaker, A. ¨Royal Palm Resort Investigation, Cyclic Testing of
Reinforced Concrete Captive Columns¨. Report
No. EERCL-STI/97-01. Earthquake
Engineering Research
Center, University
of California at Berkeley,
June 1997, 120 pp.
Professional Organizations
- American Concrete
Institute
o
Committee 314, Simplified Design of Concrete
Buildings, (2004).
o
Committee 408, Bond and Development of
Reinforcement, Member and Secretary (2000 – present).
o
o
Committee 445, Shear and Torsion, Member (2003
– present)
o
Committee 439, Steel Reinforcement, Member
(2004).
o
TAC Technology Transfer Committee, ITG-4:
High-Strength Concrete for Seismic Applications, member and co-author. (2003
– present)
o
Ad hoc Committee on Shear on Prestressed
Concrete Members, Chair (2003 – present).
o
Committee 341, Earthquake Resistant Concrete
Bridges, Member (2004).
·
American Institute of Steel Construction
o
Information Technology Committee
- American Society of
Civil Engineers
- Earthquake Engineering
Research Institute
- NEES Consortium, Inc.
- Consortium of
Universities for Research in Earthquake Engineering
- American Society of
Engineering Educators
Honors and Awards
- Bellows
Scholar, School of Engineering,
University of Kansas,
2003
- Phi
Kappa Phi Honor Society